Maintenance
90
GA10218_002_C0 - 10/2016 - © Leybold GmbH
4.4 Maintenance Work
4.4.1 Opening of the PHOENIX L300i
1: Openings for removal of the cover for the mechanical section
2: Four screws for loosening the cover for the electronics section.
3: Mechanical cover
4: Electronic cover
To open the PHOENIX L300i please follow the next steps:
1. Switch the PHOENIX L300i off.
2. Pull the mains cord on the PHOENIX L300i.
3. Separate the PHOENIX L300i from other vacuum components at the test port.
Fig. 40 Back view of the PHOENIX L300i
To Next Page
Loading...
