13
Tools Needed
• Flathead screwdriver
• Hammer
• 17 mm wrench
Instructions
1. Pry open each of the clips on the shipping container with a flathead screwdriver.
1.1 Note: Hammer the clips even further down to aid in removing the shipping container
from the base.
2. Lift the top of the shipping container from its base, which is bolted to the TDP 6s
®
.
3. Remove the plastic wrapping.
3.1 Note: Save the wrapping for future transport and/or storage.
4. Remove the bolts from the shipping container's base with a wrench.
4.1 Note: Keep the bolts and the shipping container’s base in case you need to move or
relocate the TDP 6s
®
.
Unpacking the TDP 6s
®
Watch a video of a TDP 6s
®
unboxing at https://www.lfatabletpresses.com/videos/tdp-5-
unboxing-setup
To Next Page
Loading...