LFA TDP 6s - Mounting the TDP 6 S

15
Mounting the TDP 6s
®
WARNING: To prevent personal injury, wear steel toe boots and heavy duty grip
gloves while transporting the TDP 6s
®
.
LFA does NOT recommend carrying the machine manually but rather with
an engine hoist. At least two people should be involved (one operating the
engine hoist and one stabilizing the machine) in removing the machine from the
shipping container and placing it in the workspace.
Transporting the TDP 6s
®
Tools and Materials Needed
• Engine hoist and lifting strap
Instructions
1. Secure the engine hoist onto the eyelet bolt attached to the top of the TDP 6s
®
Base.
2. Wrap the lifting strap to support both the bottom and top of the TDP 6s
®
.
3. Carefully transport the machine to the desired workspace.