63
Material of Contact Parts
Contact Part Material
Boot Copper coat CR
Base Plate A3 steel coat CR
Tooling
(Upper Punch, Lower Punch, and Die)
User specified
Ejection Tray SUS304 stainless steel
Hopper SUS304 stainless steel
Technical Specifications
Number of dies 1
Max production capacity 3000/hour
Max diameter of tablet 22 mm
Max thickness of tablet 6 mm
Max fill depth 16 mm
Max pressure 60 kN
Number of filling stations 1
Double layered tablet No
Motor power 0.75 kW
Number of phase 1
Amps 13 A
Volts 240 V (110 V on request)
Overall size 890 mm x 500 mm x 880 mm
Weight 150 kg (330 lbs)
To Next Page
Loading...