37
4. Remove the top part of Boot Timing Bar from the Boot Timing Cam.
4.1 Note: To make removal easier, turn the Handle to rotate the Boot Timing Cam so you
can easily access the Boot Timing Bar.
5. Remove the Boot Timing Cam Runner from the Boot Timing Bar by hand.
6. Remove the Boot Timing Bar from the Base Plate.
Replace the Boot Timing Bar
7. Place the Boot Timing Cam Runner on the new Boot Timing Bar.
8. Insert the new Boot Timing Bar with the runner into the side of the Boot Timing Cam.
9. Insert the new Boot Timing Bar's end in the Boot
10. Tighten the Boot Timing Bar bolt with an Allen key.
11. Reinsert the Hopper.
12. Turn the Hand Wheel for one rotation to ensure that the machine runs smoothly before
plugging it in and turning it on.
To Next Page
Loading...