LFA TDP 6s - Page 61

61
Motor Mounting Plate (#AFC0039)
The Motor Mounting Plate is hinged and
connects the Motor to the TDP 6s
®
Base. It can
be moved to adjust the tension of the V Belts.
Order at https://www.lfatabletpresses.com/tdp6s-
motor-mounting-plate
V Belts (Drive Belt) (#H108013038)
The V Belts connects the Motor to the TDP
6s
®
's running parts. Order at https://www.
lfatabletpresses.com/tdp6s-v-belt-drive-belts
Hopper Holder
The Hopper Holder is a small bar that secures
the Hopper in place. Order at https://www.
lfatabletpresses.com/tdp6s-hopper-holder