LG 29EA93-P - Adjusting Stand Height

12
ENG
ENGLISH
ASSEMBLING AND PREPARING

Oncethepinisremoved,itisnotnecessary
tore-insertittoadjusttheheight.
Adjusting the stand height
2
 Removethetapeattachedatthebottomrear
ofthe stand body, thenpulloutthelocking
pin.
4
 Theheightcanbeadjustedupto110.0 mm.

Donotputyourfingersor
handbetweenthescreen
andthebase(chassis)when
adjustingthescreen'sheight.
Tape
Locking Pin
Stand Body
CAUTION
WARNING
110.0mm
3
 PushtheHeaddownwardandpulloutthe
Locking Pin.
Head
Locking pin
1
 Placethemonitormountedonthestandbase
inanuprightposition.
29EB93