LG 29MA73D - Mounting on a Table; Tidying Cables

ENGLISH
13
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may
occur.
CAUTION
10 cm
10 cm
10 cm
10 cm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
CAUTION
Tilt from -5 to +20 degrees up or down to
adjust the angle of the TV to suit your view.
NOTE
Front Rear
Tidying cables
Gather and bind the cables with the supplied
cable tie.
-5 20
: