18
CONNECTING PIPES
ENGLISH
Pipe Drawing Out
Method of drawing out pipes on the front side and right side
- Proceed with the pipe work as shown in the below figure for front side and right side pipe draw-
ing out.
Pipe Knock Out for
Liquid/Gas pipes
Putty or insulating material
(Produced locally)
※Pictures may differ depending on the model.
Method of drawing out pipes on the bottom side
- Drawing out common pipe through base panel
Liquid pipe Gas pipe
Remove only liquid/gas pipe Knock out
Preventing foreign objects form entering
• Plug the pipe through
.
holes with putty or
insulation material(procured locally)to stop
up all gaps,as shown in the figure.
• Insects or small animals entering the out-
door unit may cause a short circuit in the
electrical box.
To Next Page
Loading...
