LG CL09R.N20 - Installer Setting -Optional Function Setting

30
OPTIONAL OPERATION
ENGLISH
Installer Setting -Optional Function Setting
Setting feature for indoor unit when air cleaning / heater / humidifier / Up/down grill / Ventilation
KIT / Auxiliary Heater is newly installed, or installed unit is removed.
Function Code Existing condition
Select existing condition of
each mode by pressing
button.
(00: not installed,
01 : installed)
3
Press button to save.
4
If pressing button long for 3
seconds, it enters into remote controller
setter setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
1
If pressing button repeatedly, it moves to the
selected option function code as picture below.
2
Pressing button will exit settings mode.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25
seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
5
Function
Plasma purification
Electric heater
Dehumidifier
Elevation grill
Ventilation kit
Auxiliary heater
Code
20
21
22
23
24
25
1,MFL67939930,영영 2018. 3. 16. 영영 2:25 Page 30