LG M2250D - Page 102

ENGLISH
102
EXTERNAL CONTROL DEVICE SETUP
20. Programme Add/Skip (Command: m b)
TosetskipstatusforthecurrentProgramme.
Transmission
[m][b][][SetID][][Data][Cr]
Data00:Skip  01:Add
Acknowledgement
[b][][SetID][][OK/NG][Data][x]
Real data mapping
00:Step0 Tint
: Step0:R50
A:Step10(SetID10) :
: Step49:R1
F:Step15(SetID15) Step50:0
10:Step16(SetID16) Step51:G1
: :
64:Step100 Step100:G50
:
6E:Step110 Balance
:
73:Step115
Step0:L50
74:Step116 :
: Step49:L1
CF:Step199 Step50:0
: Step51:R1
FE:Step254 :
FF:Step255 Step100:R50
Colour Temperature
Step0:W50
:
Step49:W1
Step50:0
Step51:C1
:
Step100:C50
21. Key (Command: m c)
TosendIRremotekeycode.
Transmission
[m][c][][SetID][][Data][Cr]
DataMin:00toMax:64
*DataKeycod-Seep.94
Acknowledgement
[c][][SetID][][OK/NG][Data][x]
22. Back Light (Command: m g)
ToControlthebacklight.
Transmission
[m][g][][SetID][][Data][Cr]
Data:dataMin:00toMax:64
Acknowledgement
[g][][SetID][][OK/NG][Data][x]
23. Input select (Command: x b) (Main Picture Input)
Toselectinputsourceformainpicture.
Transmission
[x][b][][SetID][][Data][Cr]
DataStructure
Data00:DTV  40:Component
 10:Analogue 60:RGB
 20:AV  90:HDMI
Acknowledgement
[b][][SetID][][OK/NG][Data][x]