LG Multi V - Page 74

HR Unit PCB
- 74 -
Copyright © 2020 LG Electronics Inc.
All rights reserved. Only training and service purposes.
S/W No. Setup
No.1 Manual addressing of valve #1 (Master) / #5 (Slave)
No.2 Manual addressing of valve #2 (Master) / #6 (Slave)
No.3 Manual addressing of valve #3 (Master) / #7 (Slave)
No.4 Manual addressing of valve #4 (Master) / #8 (Slave)
SW02B
SW02B Increase in the digit of 10 of valve address
SW01B
SW01B Increase in the last digit of valve address
SW01C
0
SW01C Manual addressing of zoning indoor units
* Use for Zoning setting
SW01E
SW01E
SW #1 On : Select Valve #1
Master
ON
OFF
SW02B SW01B
Input the central control
address of Indoor unit
Master
SW01E
SW #1 Off : Finish Valve #1
Master
ON
OFF
SW01E
SW #2 On : Select Valve #6
Slave
ON
OFF
SW02B SW01B
Input the central control
address of Indoor unit
Slave
SW01E
SW #2 Off : Finish Valve #6
Slave
ON
OFF
1) Normal setting (Non-Zoning setting)
ex) Manual pipe detection of Valve #1, 6.