LG PD36 - Clock Setting Procedure; Alarm Function Setup

Operating12
Operating
2
Setting the Clock
1. Turn the unit o.
2. Press CLOCK SET for at least 2 seconds.
3. Choose time mode by pressing
Y/U
.
- 12:00 (for an AM and PM display) or 0:00 (for a
24hourdisplay)
4. PressCLOCK SET to conrm your selection.
5. Select the hour and the minute by pressing
Y/U
.
6. Press CLOCK SET.
7. Select the year, month and day by pressing
Y/U
.
Year
Month
Day
Year Day Month
8. PressCLOCK SET.
9. Ifyouwanttoresettheclock,repeatsteps1-8.
10. If you want to stop while setting the clock, press
and hold CLOCK SET
y
Ifyouwanttoset12h,“PM”appearsinthe
display window.
y
Ifyouwanttoset24h,“PM”disappearsin
the display window.
,
Note
Using your unit as an alarm
clock
1. Turn the unit on or o
2. Press ALARM 1/2 for at least 2 seconds. Each
of functions ashes. (You can set ALARM 1 and
ALARM 2)
3. The hour setting ashes.
Press
Y/U
to change the hour and press
ALARM to save.
4. Theminutesettingashes.
Press
Y/U
to change the minute and
press ALARM to save.
5. You can change in the following order, TUNER
-> BUZZER -> USB -> IPOD by using
Y/U
.
Press ALARM to save.
6. The alarm periods setting ashes.
Press
Y/U
to change the alarm periods,
and press ALARM to save.
alarm periods : 7Days -> 5Days -> 2Days
7Days : Everyday
5Days : Weekday
2Days : Weekend
7. The volume settings ashes.
Press
Y/U
to change the volume and
press ALARM to save.
8. Thetimewhenyouwanttostopringingashes.
Press
Y/U
to change the hour and
minute. Then press ALARM to save.
9. Youcancheckthesettingstatus.
10.Ifyouwanttoresetthealarm,repeatsteps2-8.
PD36D-FP-AAUSLL-ENG.indd 12 11. 08. 26 �� 5:45