LG PD36 - Radio Operations Guide; Tuning and Listening to Radio; Saving and Recalling Radio Stations

Operating14
Operating
2
Radio Operations
Listening to the radio
1. Press FUNC. until TUNER appears in the display
window.
The last received station is tuned in.
2. Auto tuning : Press and hold
Y/U
for
about 2 seconds until the frequency indication
starts to change, then release. Scanning stops
when the unit tunes in a station.
Manual tuning: Press
Y/U
repeatedly.
3. Adjust the volume by pressing VOL (+/-) on the
top panel.
Presetting the Radio Stations
You can preset 6 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNC. until TUNER appears in the display
window.
2. Select the desired frequency by using
Y/U
3. Press MEMORY until a preset number will ash
in the display window.
4. PressPRESET to select the preset number you
want.
5.
Press MEMORY. The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET.
Deleting all the saved stations
Press MEMORY for at least two seconds. “CLEAR”
will ash up on the unit display.
Press MEMORY to erase all saved radio stations.
Improving poor FM reception
Press
T
on the unit. This will change the tuner
from stereo to mono and usually improve the
reception.
Be sure to extend the antenna fully. And adjust
it to get more clear reception.
,
Note
PD36D-FP-AAUSLL-ENG.indd 14 11. 08. 26 �� 5:45