Owner's Instruction
Owner’s & Installation Manual 13
ENGLISH
What is the three-minute delay function?
The function to protect the compressor delays the output of cool air when operating instantly
after interrupting the cooling mode .
Cooling mode restarts after 3 minutes when the compressor starts to operate.
ZONE 1 ZONE 2 ZONE 3 ZONE 4
AUTO INDOOR REMO
ZONE 1 ZONE 2 ZONE 3 ZONE 4
2TH
REMO
A click of the button will increase the expected
temperature by 1°C
A click of the button will decrease the expected
temperature by 1°C.
AUTO
1
Cooling mode will begin if you press the button.
3
Press the button and choose one of the functions
among
, , ,
and if you want another
operation mode during the operation.
4
If you press the button, the cooling mode will
stop.
2
Press the button and set the expected
temperature lower than the current room temperature.
(18~30°C)
If the expected temperature is set higher than the current
room temperature, the cooling function will not begin and
just the blowing operation will continue.
Cooling Mode
Owner's Instruction
• You can choose the expected temperature from 18˚C to 30˚C.
• It is recommended that the ideal difference of the temperature between indoors and outdoors should be
less than 5°C.
To Next Page
Loading...
Need help?
General
