Owner's Instruction
14 Deluxe wired remote controller
ZONE 1 ZONE 2 ZONE 3 ZONE 4
AUTO INDOOR REMO
ZONE 1 ZONE 2 ZONE 3 ZONE 4
2TH
REMO
A click of the button will increase the expected
temperature by 1°C
A click of the button will decrease the expected
temperature by 1°C.
AUTO
What is the three-minute delay function?
It will take a time for the product to blow warm air. The delay is just to protect the compressor.
The room will be heated with warm air after three minutes when the compressor begins
operation.
■ The cooling-only model will not do heating function.
Heating Mode
1
Press the button and then press the button.
2
Set the expected room temperature higher than the
current room temperature. (16~30°C)
3
Press the button and choose one of the functions
among , ,
,
and if you want another
operation mode during the operation.
4
If you press the button, the heating operation will
stop.
* If the expected temperature is set lower than the current
room temperature, the heating operation will not begin
and just the blowing operation will continue.
To Next Page
Loading...
Need help?
General
