LG PH300 - Using the Projector

31
USINGTHEPROJECTOR
Usingtheprojector
1 When in standby mode, press the POWER button to turn the projector
on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching the
screen.
Button Description
CH
,
Changes the TV channel.
LIST Displays the channel list.
0-9 Enters a channel number.
VOL+,- Adjusts the volume level.
MUTE
Mutes the sound from the projector.
Q.MENU Enters the quick menu. (See page 38)
FLASHBK
Displays the channel you were watching
previously.
4 To turn the projector off, press the POWER button.