33
ERROR
ERROR DECISION
BASIS
CAUSE FOR ERROR
OCCURRENCE
REMEDY
THERMISTOR
AC, MOTOR
(CLUTCH
MOTOR)
· Thermistor has a bad
connection or failed
· AC motor has a bad
connection or failed
· Clutching is failed
-. Coupling get out of
gear.
-.Coupling is broken.
· Check the connections at the
Thermistor and at the WHITE
3-pin connector at the main
board
· Test thermistor to determine it is
not detective
· Check the connections at the
AC motor and at the WHITE
6-pin connector at the main
board
· Test AC motor or coupling to
determine it is not detective
· Reseat the connector.
· Replace the thermistor if
necessary.
·Reseat the connector.
· Replace the AC motor if
necessary.
· Replace the coupling or Clutch
housing if necessary.
To Next Page
Loading...
