16 Chapter 3 Unpacking And Installation
Liebert.CRV Series Air Conditioner User Manual
3.5 Installation
1. Open the unit panel, follow the procedures as below:
1) Opening the front up panel, the serial number of the unit for service is revealed. See ‘a’ in Figure 3-7.
a
Figure 3-7 Serial number of the unit
2) Using a screwdriver open the electrical panel and the front down panel to prepare installation, as shown in
Figure 3-8.
Open the electrical panel Open the front down panel
Figure 3-8 Open the electrical panel and the front down panel
3) Using the keys (‘b’ in Figure 3-9) open the electrical panel and the down panel on the rear.
To Next Page
Loading...
