Lifebreath RNC5 HEX TPF User Manual

lifebreath.com 24
20 INSTALLER SELECTABLE HIGH SPEED SETTINGS
Adjusting the DIP Switches
The circuit board on this unit has adjustable DIP switches for the selection of three different high speeds. The
factory setting is Hi3. Refer to www.libreath.com for the specifications sheet particular to the unit.
DIP Switch settings
Speed
Switch
1
2
3
4
Hi 3 (High Speed)
ON
Leave on factory setting
ON
ON
Hi 2 (Med Speed)
ON
Leave on factory setting
OFF
ON
Hi 1 (Low Speed)
ON
Leave on factory setting
ON
OFF
Note: Low Speed is not adjustable; Switch 1 factory setting is ON
Functionality of DIP Switches
Switch
Status
Description
2
ON
Recirculation enabled
OFF
Recirculation disabled
Note: Recirculation is not available on all units.

Lifebreath RNC5 HEX TPF Specifications

General

Brand	Lifebreath
Model	RNC5 HEX TPF
Category	Fan
Language	English