LifeSafety Power FlexPower C4 - User Manual

LifeSafety Power, Inc. | PH 888.577.2898 | TechSupport@LifeSafetyPower.com
C4/C4P, C8/C8P Installation Manual
P03-006 Rev A15

Summary

Installation and Specifications

Specifications

Details technical specifications including voltage, current, size, and weight.

Mounting the Power Control Modules

Instructions for physically mounting the power control boards to an enclosure.

Power Control Accessory Overview

Zone Inputs

Configuration Jumpers

Jumpers program zone input, output, and FAI operation, color-coded for ease.

Connecting the Power Control Module

Diode Removal Procedures

Input and Output Wiring

Input Wiring

Details wiring for relay contact, voltage, or open collector inputs on C4/C4P and C8/C8P.

Output Wiring

Explains wiring for relay contact or wet/voltage outputs, and polarity for each.

Common Jumper Settings

C4;C4 P Application Examples

Zone 1: Mag Lock Output, Voltage Input, with FAI

Zone 3: Door Strike Output, Open Collector Input, no FAI

Zone 4: NC Relay Contact Output, NC Relay Contact Input, with FAI

C8;C8 P Application Examples

Zones 1-4 Application Examples

Details application examples for Zones 1 through 4 on the C8/C8P module.

Zones 5-8 Application Examples

LifeSafety Power FlexPower C4 Specifications

General

Power Supply Type	Switching
Mounting Type	Wall mount
Number of Outputs	4
Battery Charging Current	1A
Input Voltage	120-240VAC
Output Voltage	12VDC or 24VDC
Output Current	4A
Operating Temperature	0°C to 49°C
Dimensions	4.5 inches
Weight	10 lbs
Humidity	85% non-condensing