Need help?Do you have a question about the LifeSafety Power M8P and is the answer not in the manual?
General| Input Voltage | 120/240 VAC, 50/60 Hz |
|---|---|
| Number of Outputs | 8 |
| Mounting Type | Wall mount |
| Output Voltage | 12V DC or 24V DC |
| Operating Temperature | 0°C to 49°C |
Describes using snap-in standoffs to mount the M8/M8P board into an enclosure.
Details on using dry contact, voltage, or open collector inputs for zones 1-8.
Details the terminal blocks for input and output field wiring on the M8/M8P board.
Explains connections for FlexIO, SPI, and DC power busses (B1, B2, BR) for system integration.
Instructions on how to modify reverse protection diodes for specific lock release delay issues.
Explains how to wire dry contacts, voltage inputs, and open collector inputs to the M8/M8P terminals.
Details on programming zone inputs, output load types, and unlock conditions.
To Next Page
