39
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
5.6
While holding the Trigger (AMN) in, insert the notched end of the Inner
Channel (AKQ) into the Outer Tube (ALB). Continue to insert the Inner
Channel into the Outer Tube until the Trigger clicks into the fi rst slot.
Then release the Trigger.
Note: Ensure that the notches on the Inner
Channel face the Handle as shown.
!
ALB
AKQ
SEC
5.7
Attach the Inner Channel (AKQ) to the 0OLE"RACKET!,, with the hardware
shown.
7!2.).'
Do not overtighten the Cap Nut.
AAN (x1)
AAM (x1)
1/2” (x2)
AAM
AAN
ALL
To Next Page
Loading...
