Lifetime 51544 - Page 44

44
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
6.1
Remove the plastic fi lm from the "ACKBOARD!*), and attach the
#ENTER&RAME0AD!*1 to the Backboard in the location shown with
the hardware indicated. Make sure that the Center Frame Pad is
centered on the metal piece of the Backboard as shown.
SEC
6.2
Attach the #ORNER&RAME0ADS!*8 to the "ACKBOARD!*)in the locations
shown with the hardware indicated.
ADP
!*8
ADP
!*8
!*8
!*)
!*)
!*1
ADP
ADP
ADP
ADP
ADP (x8)