Lighthouse REMOTE-2 PN Series Operating Manual
2-2 248083310-1 Rev 3
higher. Refer to the Specifications table for additional information.
Figure 2-1 REMOTE 5102PN Particle Counter
REMOTE-2 PN instruments use the Elite™ laser diode light source
and collection optics for particle detection. The collection optics collect
and focus light scattered by the particles onto a photo diode that
converts the bursts of light into electrical pulses. The pulse height is a
measure of particle size. Pulses are counted and their amplitude is
measured for particle sizing.
The REMOTE-2 PN Series of particle counters were designed for
continuous trouble-free operation using an internal flow-controlled
vacuum pump and a standard NEMA style 316L stainless steel
enclosure. This design provides an industry standard mounting
configuration and can be installed where space is limited. REMOTE-2
PN Series instruments integrate seamlessly with large facility
monitoring and management systems and transfer up to 2 channels of
simultaneous particle count data using 4-20mA output.
Accessories The REMOTE-2 PN Series instrument supports remote monitoring
when equipped with a tubing kit of 3 meters.
Several accessories can be ordered to tailor the instrument to your
needs. Please contact your Sales Engineer for these options.
Annual
Calibration
The manufacturer recommends that your Lighthouse instrument be
calibrated annually by a Certified Lighthouse Service Provider to ensure
that it continues to perform within specification.
To Next Page
Loading...
