Lighthouse REMOTE-2 PN Series - Get Current Settings; Display Menu of Commands

Programming
248083310-1 Rev 3 4-7
GET CURRENT SETTINGS
<?>
Shows current parameter settings.
Type:
<?>
Response:
Note: The flow rate
displayed will be according
to the model - 0.1 cfm for
the R3012PN and
R5012PN or 1.0 cfm for
the R3102PN and
R5102PN.
<?>
Flow Rate = 1.0 cfm or 0.1 cfm
Sample Time = 5 secs
Range1= 10000.
Range2= 1000.
Service High = 3000 mV
Service Low = 145 mV
Alarm Channel = 1
Alarm Threshold = 1000 counts
Suppress Alarms = 2
Channel 1 = 0.3
Channel 2 = 0.5
DISPLAY MENU OF COMMANDS
<m1>
Shows menu of commands.
Type:
<m1>
Response:
<m1>
*** User Menu ***
<?> Display Parameters
<V> Verbose Mode
<sa> Start Counting
<sb> Stop Counting
<gv> Get Version Number
<ra#> Set Range 1 (counts)
<rb#> Set Range 2 (counts)
<ta#> Set Sample Seconds