Lighthouse REMOTE-2 PN Series - Dont Show 1 Sec Data; Show 1 Sec Data; Get Background Light Value

Programming
248083310-1 Rev 3 4-13
DON’T SHOW 1 SEC DATA
<ia>
Turns OFF 1 second data display.
Type:
<ia>
Response:
<ia>Don't show 1 sec data.
After starting the counter with <sa>, the device will wait until the
sample time interval passes before displaying the first sample.
SHOW 1 SEC DATA
<ib>
Turns ON 1 second data display.
Type:
<ib>
Response:
<ib>Show 1 sec data.
After starting the counter with <sa>, the device will show the samples
collecting every second.
secs=1: ch1-2: 0, 0. , bk= 424
secs=2: ch1-2: 0, 0. , bk= 424
secs=3: ch1-2: 0, 0. , bk= 424
secs=4: ch1-2: 0, 0. , bk= 424
secs=5: ch1-2: 1, 0. , bk= 424
This mode can be used to view the data on a second-by-second basis
for troubleshooting.
GET BACKGROUND LIGHT VALUE
<gb>
Displays the current background value in milli-volts (mV).