Lighthouse REMOTE 2 Series - Accessories

Lighthouse REMOTE 2012, 3012, 5012, 3102, 5102 Operating Manual
2-2 248083201-1 Rev 6
The particle counter uses laser diode light source and collection optics
for particle detection. The collection optics collect and focus light
scattered by the particles onto a photo diode that converts the bursts of
light into electrical pulses. The pulse height is a measure of particle
size. Pulses are counted and their amplitude is measured for particle
sizing.
The REMOTE 2 Series line of Airborne Particle counters was created
for continuous operation 24 hours per day, 7 days per week.
Using an external vacuum source, the instrument provides versatile
mounting options and can be installed where space is at a premium.
The REMOTE 2 Series instrument integrates seamlessly with large
facility monitoring/management systems and transfers 2 channels of
simultaneous particle count data using 4-20mA output.
Accessories You can order several accessories to tailor the instrument to your
needs. These accessories are listed below.
• Isokinetic Sampling Probe 0.1 or 1.0 CFM
• Sample Tubing
• Instrument to PC Cabling, RJ-45 to DB-9
• 0.1Pm Purge Filter Assembly 0.1 or 1.0 CFM Flow Rate with
Tubing
• Vacuum tubing per foot
• Cable per foot