Lighthouse REMOTE 3104P, 5104P Operating Manual
6-10 248083336-1 Rev 3
Figure 6-11 Telnet Config Password Screen
16. Type S to Save and restart and press Enter to save the changes.
Note:
When the
Ethernet restarts, it will
lose connection to the PC,
reported as, "Connection
to host lost".
Figure 6-12 Saving the Settings
17. Perform Step 6. though Step 18. for each 5104P.
WARNING:
Step 18 is
very important to prevent
network address errors
on the PC when the
process is complete.
18. Clear the ARP Cache by type arp –d * and press Enter. If this is
not done before quitting this process, the PC may create "ghost
IPs" on the LAN and cause serious problems with the network.
19. Type Exit to quit the command console.
To Next Page
Loading...
