Ethernet Installation
248083336-1 Rev 3 6-9
Figure 6-9 Assigning Gateway IP Address
14. Type Y to set the Netmask. type the desired Netmask value and
press Enter.
Figure 6-10 Assigning Netmask
15. Type N in response to "Change telnet config password". The
3104P or 5104P is shipped without a password. Changing the
telnet password or providing one is discouraged, except for
absolute security requirements. If a password is applied and
forgotten, the 3104P or 5104P will have to be returned to
Lighthouse to get it cleared.
To Next Page
Loading...
