Labels
Label for DL2
Label for CBD6S 200W (SMPS)
Label for CBD6S 300W (SMPS)
up to 4 channels
LINAK APPLICATION POLICY
The purpose of the application policy is to define areas of responsibilities in relation to applying a LINAK
product defined as hardware, software, technical advice, etc. related to an existing or a new customer
application.
LINAK products as defined above are applicable for a wide range of applications within the Medical,
Furniture, Desk and Industry areas. Yet, LINAK cannot know all the conditions under which LINAK products
will be installed, used, and operated, as each individual application is unique.
The suitability and functionality of the LINAK product and its performance under varying conditions
(application, vibration, load, humidity, temperature, frequency, etc.) can only be verified by testing, and shall
ultimately be the responsibility of the LINAK customer using any LINAK product.
LINAK shall be responsible solely that LINAK products comply with the specifications set out by LINAK and it
shall be the responsibility of the LINAK customer to ensure that the specific LINAK product can be used for
the application in question.
To Next Page
Loading...
