To Next PageTo Next Page
Need help?Do you have a question about the Linear Access AM/II and is the answer not in the manual?
General| Brand | Linear Access |
|---|---|
| Model | AM/II |
| Category | Control Systems |
| Language | English |
Prevents tailgating and discourages keycode guessing.
Control who gets access to which areas and at what times.
Control access devices and sense auxiliary inputs.
Step-by-step guide for installing the AM/II system.
Procedure to access the system's programming interface.
Procedure to leave the programming interface.
Entering new transmitter IDs into the system.
Temporarily disabling transmitter access.
Re-enabling suspended transmitters.
Checking the operational status of a transmitter.
Removing a single entry code from the system.
Removing all single transmitters from the system.
Programming sequential blocks of transmitter IDs.
Temporarily disabling access for transmitter blocks.
Re-enabling suspended transmitter blocks.
Checking the status of block-coded transmitters.
Removing all block transmitters from the system.
Programming MGT obstacle transmitter IDs.
Programming MDT-4 transmitter IDs for Magic Wand use.
Programming keypad entry codes for access.
Temporarily disabling keypad entry codes.
Re-enabling suspended entry codes.
Checking the status of keypad entry codes.
Setting door schedules, time zones, and anti-passback for groups.
Programming relay activation modes (timed, pulse, toggle, latch).
Configuring relay channels, operations, and time zones.
Setting the duration for anti-passback security.
Setting the password for local programming access.
Setting the password for remote programming access.
Setting a password for priority access functions.
Setting addresses, types, and options for remote devices.
Programming data format, mode, and facility code for external panels.
Assigning a relay for priority access activation.
Generating a report of the overall system configuration.
Generating a report of all programmed single transmitters.
Generating a report of all programmed block transmitters.
Generating a report of all programmed entry codes.
Generating a report of all programmed block card codes.
Generating reports of system events from the event log.
