To set positions:
Activate the keypad by pressing the GO button.
Press and hold corresponding button until required position is reached.
10.1.1 Central STOP Button
The central STOP button 7 immediately interrupts all bed movements.
Pressing central STOP button 7 for at least 0.3 seconds immediately stops all electronic bed movements.
10.1.2 Activating GO Button
The GO button 18 activates the keypads on all control elements except the foot control.
A GO button is included on a number of different control elements. The function of the GO button is identical on
all control elements.
After pressing GO button 18, the keypad will remain active for 3 minutes. It is possible to control every function on
the bed except the locked functions.
Pressing a function button will keep the keypad active for another 3 minutes.
It is necessary to activate the keypad again if the 3 minute period without pressing any function is passed.
10.1.3 Function Buttons
Function buttons 3, 4, 5 and 6 allow the setting of different positions, for example the height and tilt of the
mattress plat-form, adjust individual mattress platform elements, etc.
NOTE: The bed can be stopped by pressing two different buttons even on two different controllers. If the press of
the buttons is longer than 0,5 second the bed will stop all the movements immediately.
To set a position:
Activate the keypad by pressing the GO button.
Press and hold the respective button until required position is reached.
10.1.4 Lock Buttons
Lock button 2 allows disabling individual functions on the supervisor control panel.
To disable functions:
Activate the keypad by pressing the GO button 18.
Press respective lock button.
The respective LED flashes to indicate the lock.
NOTE: The individual functions are locked in the central control panel, the satellite control and the handset.
To enable disabled functions:
Activate the keypad by pressing the GO button.
Press the respective lock button.
The respective LED goes out. The function is enabled.
To Next Page
Loading...
Need help?
General
