LINET WS17

89 pages

To Next Page

To Next Page

Loading...

User Manual and Technical

Description

ELEGANZA 4

Positionable Bed for Intensive Care

D9U001GE4-0101

Version: 05

Publication Date: 2019-05

version with scales and without scales

Table of Contents

Default Chapter3
- Table of Contents3
1 Symbols and Definitions4
- Warning Notices4
- Types of Warning Notices4
- Structure of Warning Notices4
- Instructions4
- Lists4
- Symbols on the Package5
- Symbols and Labels on the Bed5
- Serial Label with UDI9
- Acoustic Signalisation10
- Illumination10
- Definitions11
- Abbreviations12
2 Safety Instructions13
3 Intended Use15
- Contraindications15
4 Product Description16
5 Technical Specification17
- Identification of Applied Parts (Type B)17
- Scales17
- Mechanical Specifications (Eleganza 4)17
- Environment Conditions18
- Electrical Specifications (Eleganza 4)18
- Electromagnetic Compatibility18
- Manufacturer Instructions - Electromagnetic Emissions19
- Manufacturer Instructions - Electromagnetic Susceptibility19
6 Use and Storage Conditions20
7 Scope of Delivery and Bed Variants21
- Delivery21
- Scope of Delivery21
- Eleganza 4 Variants21
8 Putting into Service22
- Accumulator Activation22
- Head Board and Foot Board23
- Mattress Support Platform23
- Potential Equalisation24
- Before Use25
- Transport25
9 Power Cable26
10 Accumulator26
- Replacing the Accumulator27
- Removing the Bed from Use28
- Deactivating the Accumulator28
11 Manipulation29
- Siderails29
- Castor Control32
- CPR Backrest Release32
- Control Elements33
- Nurse Control Panel (Optional)34
- Iboard Basic (Standard)37
- Attendant Control Panel39
- Handset (Optional)41
- Foot Switch - Bed Height (Optional)42
- Patient Control Panels42
- Bed Positioning43
- Backrest43
- Thighrest44
- Mechanical Calfrest Adjustment46
- Bed Height47
- Autocontour49
- Examination Position50
- Emergency Trendelenburg Position52
- Anti-Trendelenburg Tilt and Trendelenburg Tilt53
- CPR Position55
- Mechanical Bed Extension56
- Cardiac Chair Position59
- Mobilisation Position60
- Ergoframe60
12 Scales Control (Only Version with Scales)61
- Preparation61
- Taring61
- Displaying61
- Hold Mode62
- Bed Overload62
- Bed Underload62
- Weighing in Tilt62
- Zeroing Scales62
13 Bed Exit Monitoring (Only Version with Scales)63
- Preparation63
- Activation of Bed Exit Monitoring63
- Monitored Zone63
- Bed Exit Alarm64
- Alarm Volume64
- Pause64
- Deactivation of Bed Exit Monitoring64
14 Equipment65
- Accessory Rail with Plastic Hooks (Optional)65
- Linen Shelf (Standard)65
- Mobi-Lift ® (Optional)66
- Brake Signal (Optional)66
- I-Brake ® (Optional)66
- Retractable Fifth Castor (Optional)66
- X-Ray Examination (Optional)67
- Undercarriage Cover68
15 Mattress69
- Installation of Passive Mattress69
- Straps with Side Release Buckles69
- Installation of Active Mattress70
- Straps with Side Release Buckles70
16 Accessories71
- Lifting Pole72
- Infusion Stand73
- Oxygen Bottle Holder74
- Ventilation Circuit Holder75
- Writing Shelf76
- Monitor Shelf76
- USB Connector (Optional)77
- Urine Sack Holder77
- Safetymonitor78
17 Cleaning/Disinfection80
- Cleaning (Eleganza 4)80
- Daily Cleaning81
- Cleaning before Changing Patients81
- Complete Cleaning and Disinfection81
18 Troubleshooting82
19 Maintenance83
- Monthly Maintenance Performed by the User83
- Maintenance Every 3 Months Performed by the User83
- Maintenance Every 12 Months Performed by the Service Department of the Manufacturer83
- Spare Parts83
- Completeness83
- Wear83
- Functioning83
- Electric Control84
- Castors84
- Accessories84
- Safety Technical Checks84
- Maintenance Active Mattress85
- LINET ® Service Department85
20 Disposal86
- Environment Protection86
- Eleganza 486

Questions and Answers:

D
Dr. Sherry WoodJul 25, 2025
Why are the position buttons not working on my LINET WS17?
- C
  csmithJul 25, 2025
  If adjusting the position buttons on your LINET Medical Equipment isn't working, first, ensure the GO button is pressed. If the issue persists, check if the function is disabled on the Attendant Control Panel and enable it. Also, verify the mains connection and that the Mains Plug is correctly inserted. If actuators have no power, are defective, or the accumulator is defective, or if there's a faulty power source or control element, notify the service department.
J
Jamie PerezJul 31, 2025
What to do if the mattress support platform height/tilt adjustment is faulty on LINET WS17?
- J
  juliewatsonJul 31, 2025
  If you're experiencing issues with the height/tilt adjustment of the mattress support platform on your LINET Medical Equipment, start by checking for any obstacles on the undercarriage cover and remove them. Also, ensure the function is enabled on the Attendant Control Panel. Verify the correct insertion of the Mains Plug and check the mains connection. Should the actuators lack power, be defective, or the accumulator is defective, or if a faulty power source or control element is suspected, contact the service department.
R
Robert FranklinAug 6, 2025
How to fix faulty brakes on LINET WS17 Medical Equipment?
- S
  sandra85Aug 6, 2025
  If the brakes on your LINET Medical Equipment are faulty, check for any obstacles mechanically blocking the brakes and remove them. If the brake mechanism itself is defective, notify the service department.
D
David ToddAug 12, 2025
What to do if I cannot lower the backrest on my LINET WS17?
- K
  Kristi NguyenAug 12, 2025
  If you cannot lower the backrest from the upright position on your LINET Medical Equipment, check for any obstacles under the backrest or in the drive mechanism and remove them. If the CPR Release Handle is defective, notify the service department.
J
jennifer09Aug 18, 2025
How to fix LINET WS17 siderails if adjustment is not possible?
- J
  jenkinswilliamAug 18, 2025
  If you're unable to adjust the siderails on your LINET Medical Equipment, first check for any obstacles in the siderail release mechanism and remove them. If the siderail release mechanism is defective, notify the service department.

LINET WS17 Specifications

General

Brand	LINET
Model	WS17
Category	Medical Equipment
Language	English

Summary

Symbols and Definitions

Warning Notices

Explains types and structure of warning notices for safe operation.

Safety Instructions

Intended Use

Contraindications

Lists conditions or situations where the bed should not be used.

Product Description

Technical Specification

Mechanical Specifications (Eleganza 4)

Lists all mechanical parameters and dimensions of the Eleganza 4 bed.

Electrical Specifications (Eleganza 4)

Details the electrical requirements and specifications for the Eleganza 4 bed.

Electromagnetic Compatibility

Addresses EMC requirements and guidelines for the bed, including emissions and susceptibility.

Use and Storage Conditions

Putting into Service

Potential Equalisation

Details the procedure for potential equalization to protect patients from static electric shocks.

Before Use

Lists essential checks and preparations before the bed is put into operation.

Accumulator

Replacing the accumulator

Provides instructions and precautions for replacing the bed's accumulator.

Manipulation

Siderails

Instructions for operating and securing the bed's siderails.

CPR Backrest Release

Details the procedure for quick mechanical lowering of the backrest for CPR.

Control Elements

Overview of various control panels and handset for bed operation.

Bed Positioning

Guides for adjusting various bed positions like backrest, thighrest, and height.

Scales Control (only version with scales)

Taring

Procedure for zeroing the scales before weighing the patient.

Bed Exit Monitoring (only version with scales)

Activation of Bed Exit Monitoring

Steps to activate the Bed Exit Monitoring system and its initial settings.

Monitored Zone

Guides on switching between inner and outer zones for patient monitoring.

BED EXIT ALARM

Details how the alarm is triggered, stopped, and paused.

Deactivation of Bed Exit Monitoring

Steps to deactivate the Bed Exit Monitoring system.

Equipment

X-Ray Examination (optional)

Instructions for performing X-ray examinations with the bed, including safety precautions.

Mattress

Installation of Active Mattress

Guidelines for correctly installing and fixing active mattresses onto the mattress support platform.

Accessories

Safety Monitor

Describes the SafetyMonitor system for monitoring bed statuses and triggering alerts.

CleaningDisinfection

Cleaning (Eleganza 4)

Provides preparatory steps and guidelines for cleaning the Eleganza 4 bed.

Troubleshooting

Maintenance

Maintenance every 12 months performed by the service department of the manufacturer

Annual maintenance tasks performed by qualified personnel.

Electric Control

Checks and maintenance for electrical components like plugs, motors, and fuses.

Safety Technical Checks

Guidelines for performing mandatory safety checks on the medical bed.

Related product manuals

Preview: LINET Virtuoso

Preview: LINET OptiCare

Preview: LINET Multicare

LINET Multicare

Preview: LINET Sprint 200

LINET Sprint 200

Preview: LINET ELEGANZA 5

LINET ELEGANZA 5

Preview: LINET Sprint 100

LINET Sprint 100

Preview: LINET Eleganza 3

LINET Eleganza 3

Preview: LINET ELEGANZA 1

LINET ELEGANZA 1

Preview: LINET ELEGANZA 4

LINET ELEGANZA 4

Preview: LINET Eleganza 3XC

LINET Eleganza 3XC

Preview: LINET MULTICARE 2015

LINET MULTICARE 2015

Preview: LINET CliniCare 100 HF

LINET CliniCare 100 HF