D9U001GE4-0101_05
85
19.5 Maintenance Active Mattress
Check the following at least every 12 months:
► Check inside and outside of mattress and outside of SCU for mechanical damage and signs of severe wear and tear.
► Check if mattress and SCU are fully operational.
► Perform electrical safety checks in accordance with local safety regulations.
Check the following every month:
► Check external air lter in side of SCU for dust and dirt.
If dust or dirt is visible, replace lter.
► Replace any damaged parts immediately with original spare parts.
► Ensure that maintenance and installation are performed exclusively by qualied personnel trained by the manufacturer.
NOTE LINET ® provides service documentation for qualied personnel.
The manufacturer´s customer service is required to perform a technical safety check on the hospital bed every 12 months.
19.6 LINET
®
Service Department
Our responsible LINET ® Service partners will ensure your LINET ® products are up and running when you need them. For more
information on available service support and contract offerings, please contact us at service@linetgroup.com and ask for tech-
nical support. LINET ®‘s nationwide network of highly skilled service providers that are equip- ped to service and maintain your
LINET ® equipment at the highest level.
To Next Page
Loading...
General
