LINET Multicare User Manual (English)

Questions and Answers:

B
Bradley OrtizJul 28, 2025
What to do if LINET Medical Equipment position buttons are not working?
- J
  Jason SmithJul 28, 2025
  If the position buttons on your LINET Medical Equipment aren't working, first, ensure you press the GO button. Also, check if the function is disabled on the Attendant Control Panel and enable it if necessary. Verify the mains connection and that the plug is correctly inserted. If the drive motors have no power, are defective, or if the accumulator is defective, or if there's a faulty power source or control element, notify the manufacturer's service department.
E
Elizabeth IngramAug 3, 2025
What to do if LINET Multicare Medical Equipment mattress platform height/tilt adjustment is faulty?
- A
  Amber HoustonAug 3, 2025
  If you're experiencing issues with the mattress platform height or tilt adjustment on your LINET Medical Equipment, start by removing any objects that might be on the undercarriage cover. Then, check if the function is disabled on the Attendant Control Panel and enable it. Verify the mains connection and ensure the plug is correctly inserted. If the drive motors have no power, are defective, or if the accumulator is defective, or if there's a faulty power source or control element, notify the manufacturer's service department.
M
Matthew GonzalezAug 9, 2025
What to do if LINET Medical Equipment brakes are faulty?
- M
  Michael JacobsAug 9, 2025
  If the brakes on your LINET Medical Equipment are faulty, start by cleaning the brake system to remove any dirt that may be blocking them mechanically. If the problem persists, it's possible that the brake mechanism is defective, and you should notify the manufacturer's service department.
B
barbara12Aug 15, 2025
What to do if I can't lower the backrest from the upright position on LINET Medical Equipment?
- C
  Cindy GarnerAug 15, 2025
  If you cannot lower the backrest from the upright position on your LINET Medical Equipment, check for any objects under the backrest or in the drive mechanism and remove them. If the issue persists, the locking handle may be defective, and you should notify the manufacturer's service department.
A
Angela BrownAug 21, 2025
How to fix LINET Multicare siderails if they are not adjusting?
- K
  kristinawallaceAug 21, 2025
  If the siderails on your LINET Medical Equipment are not adjusting, start by cleaning the locking mechanism, as the siderail lock may be dirty. If cleaning doesn't resolve the issue, the release handle may be defective, and you should notify the manufacturer's service department.

LINET Multicare Specifications

General

Height Adjustment	Yes
Manufacturer	LINET
Model	Multicare
Bed Type	Electric
Length Extension	Yes
CPR Function	Yes
Side Rails	Yes
External Width	102.5 cm (with side rails)
External Length	224 cm (standard)
Mattress Platform Width	900 mm
Mattress Platform Length	200 cm
Maximum Thighrest Angle	30°
Type	Hospital Bed
Application	Hospital, Clinic, Home Care