LINET Multicare User Manual

D9U001MC0-0101_16 41
11.4.5 Bed Height Foot Control
The foot control is optional and allows setting the height of the bed with one’s feet.
1. Protection Frame against Unwanted Activation
2. Foot Switch Raise Mattress Platform
3. Foot Switch Examination Position
4. Foot Switch Lower Mattress Platform
Set the position as follows:
► Press foot switch 2, 3 or 4 to activate foot control.
► Press and hold foot switch until desired position is reached.
NOTE: It is possible to activate foot control by pressing GO button on
the control elements of the bed then it is not needed to activate the foot
control by buttons 2, 3 or 4.
Fig. Foot Control Bed Height
11.4.6 Lateral Tilt Foot Control
The foot control is optional and allows setting the lateral tilt of the bed with the feet.
1. Protection Frame against Unwanted Activation
2. Foot Switch Tilt Right
3. Foot Switch GO
4. Foot Switch Tilt Left
Set the position as follows:
► Activate the keypad by pressing the GO button.
► Press and hold foot switch until desired position is reached.
Fig. Foot Switch Lateral Tilt
11.4.7 Quick-Action Panels
The Quick-Action panels integrated in the head sections of the siderails allow the nursing personnel and the patient to adjust the
bed height.
1. Buttons Bed Height Adjustment
2. GO Button
Set position as follows:
► Activate the keypad by pressing the GO button.
► Press and hold function button until desired position is reached.
Fig. Quick-Action Panel

LINET Multicare Specifications

General

Height Adjustment	Yes
Manufacturer	LINET
Model	Multicare
Bed Type	Electric
Length Extension	Yes
CPR Function	Yes
Side Rails	Yes
External Width	102.5 cm (with side rails)
External Length	224 cm (standard)
Mattress Platform Width	900 mm
Mattress Platform Length	200 cm
Maximum Thighrest Angle	30°
Type	Hospital Bed
Application	Hospital, Clinic, Home Care