LINET Multicare X - User Manual

Questions and Answers

A
amymorganAug 7, 2025
What to do if adjusting position buttons is not possible on LINET Multicare X Medical Equipment?
- Y
  ystephensAug 7, 2025
  If you can't adjust the position buttons on your LINET Medical Equipment, here's what to check: * First, ensure you've pressed the GO button. * Confirm the function isn't disabled on the Attendant Control Panel; if it is, enable it. * Check the mains connection. A misinserted Mains Plug can cause this, so ensure it's correctly inserted. * If the above steps don't work, there may be an issue with the power, actuators, or control element. In this case, notify the manufacturer´s service department.
R
Rebecca StewartAug 12, 2025
Why is the mattress support platform height/tilt adjustment faulty on my LINET Multicare X?
- N
  Nicholas BurnsAug 13, 2025
  If you're experiencing issues with the height or tilt adjustment of the mattress support platform on your LINET Medical Equipment, consider the following: * Check for any obstacles on the undercarriage cover and remove them. * Make sure the function is enabled on the Attendant Control Panel. * Verify the mains plug is correctly inserted. If these steps don't resolve the issue, it could be due to the actuators having no power, a faulty power source, or a defective control element. In such cases, check the mains connection and notify the manufacturer´s service department.
D
David GambleAug 19, 2025
What to do if the brakes are faulty on LINET Medical Equipment?
- J
  Jamie GreenAug 19, 2025
  If the brakes on your LINET Medical Equipment are faulty, check for any obstacles that may be mechanically blocking them and remove any obstructions. If there are no obstacles, notify the manufacturer´s service department, as the brake mechanism may be defective.
J
Joel EdwardsAug 25, 2025
Why can't I lower the backrest from the upright position on my LINET Multicare X?
- M
  Meredith MedinaAug 25, 2025
  If you are unable to lower the backrest from the upright position on your LINET Medical Equipment, check for any obstructions under the backrest or within the drive mechanism and remove them. If there are no visible obstacles, notify the manufacturer´s service department, as the CPR Release Handle may be defective.
J
joshua16Aug 30, 2025
How to fix the issue when adjusting siderails is not possible on LINET Multicare X?
- D
  deborahjohnsonAug 30, 2025
  If you're having trouble adjusting the siderails on your LINET Medical Equipment, first check for any obstacles in the siderail release mechanism and remove them. If the problem persists, notify the manufacturer´s service department because the siderail release mechanism may be defective.

LINET Multicare X Specifications

General

Safe Working Load	250 kg
External length	224 cm
Backrest angle adjustment	0 - 70°
Thighrest angle adjustment	0 - 30°
Calf support angle adjustment	0 - 20°
Type	Hospital Bed
Connectivity	Wi-Fi
Trendelenburg / Antitrendelenburg	±16°