D9U001MCX-0101_03
166
Error/Fault Cause Solution
Adjusting with position buttons not
possible
GO Button was not pressed. Press the GO button.
Function disabled on Attendant Control Panel. Enable disabled function.
Actuators have no power.
Defective actuators.
Defective accumulator.
Check the mains connection.
Notify the manufacturer´s service
department.
Mains Plug inserted incorrectly. Insert the Mains Plug correctly.
Faulty Power Source. Notify the manufacturer´s service
department.
Faulty Control Element. Notify the manufacturer´s service
department.
Faulty Mattress support platform
Height/Tilt Adjustment
Obstacle on the undercarriage cover. Remove the obstacle.
Function disabled on Attendant Control Panel. Enable disabled function.
Actuators have no power.
Defective actuators.
Defective accumulator.
Check the mains connection.
Notify the manufacturer´s service
department.
Mains Plug inserted incorrectly. Insert the Mains Plug correctly.
Faulty Power Source. Notify the manufacturer´s service
department.
Faulty Control Element. Notify the manufacturer´s service
department.
Lowering Backrest from the upright
position not possible
Obstacle under the Backrest or in the drive
mechanism.
Remove the obstacle
CPR Release Handle is defective. Notify the manufacturer´s service
department.
Adjusting Siderails not possible Obstacle in the Siderail Release Mechanism. Remove the obstacle.
Siderail Release Mechanism is defective. Notify the manufacturer´s service
department.
Faulty brakes Obstacle blocking brakes mechanically. Remove the obstacle.
The brake mechanism is defective. Notify the manufacturer´s service
department.
21 Troubleshooting
DANGER!
Risk of mortal injury due to electric shock!
► If a fault occurs, have the electric motor, power box or other electrical parts repaired by qualied personnel exclu-
sively.
► Do not open the protective covers of the electric motor or the power box.
To Next Page
Loading...
Need help?
General
