LINET Multicare

D9U001MC0-0101_1650
Place the patient on the bed.
To cancel taring:
► Press icon 8 while taring.
13.1.3 Displaying
Display 3 shows normally actual patient´s weight.
Veri cation Scale Interval is 0.5 kg.
Press icon 5 to display value with actual scale interval 0.1 kg for 5s. After 1 minute the displayed weight value is automatically hid-
den. This function can be activated or deactivated on the settings screen.
13.1.4 Hold Mode
Hold mode must be used only when the scales are stabilized (icon 2 is shown on the display). It allows adding or removing bed
accessories and other items without changing the weight value.
To activate Hold mode:
► Wait until the scales are stabilized. The icon 2 will be illuminated when the scales are stabilized.
► Press icon 7.
► The display shows „HOLD“.
► Add or remove required accessories.
To deactivate Hold mode:
► After adding or removing accessories wait until the scales are stabilized. When the scales are stabilized the icon 2 is
illuminated.
► Press button 7.
► Display shows the original weight.
To deactivate Hold mode without  xing the weight value:
► Press button 8.
13.1.5 Saving Weight of Patient
Icon 4 allows saving one particular weight value of patient each day. Saved value will be displayed in History Subscreen.
To save weight of patient:
First save of the day:
► Press button 4.
Second (and all next) save of the day:
► Press button 4.
► Con rm saving of the weight on the pop-up by pressing green tick.
-or-
► Deny saving of the weight on the pop-up by pressing red cross.
13.1.6 History Subscreen
To open History Subscreen:
► Press icon 1
Fig. Pop-up (Confi rm or Deny Saving)