D9U001GE4-0101_0572
16.1 Lifting Pole
To ensure safe use of the lifting pole:
► Never exceed the maximum load of 75 kg.
► Never use the lifting pole for rehabilitation exercises.
► To prevent the bed from tipping over, ensure that the lifting pole
does not project out from the bed.
► Replace plastic handle every 4 years.
To install the lifting pole:
► Insert lifting pole in corresponding sleeve tting on accessory adapter at head end.
► Ensure that safety pin locks into place.
► Attach a plastic grab handle with an adjustable strap to the lifting pole.
NOTE The date of manufacture is marked on the grab handle. LINET® recommends
replacing the plastic grab handle every four years.
Fig. Accessories
Fig. Lifting pole
2
3
4
1
1. Lifting pole
2. Infusion stand
3. Oxygen bottle holder
(vertical version)
4. Ventilation circuit holder
Fig. Places for lifting pole (sleeve ttings on accessory adapter)
Accessory head
end
foot
end
on
sides
Lifting pole
a
with Triangular holder
a
with Infusion holder
a
Infusion Stand
a
with Fixation holder
a
with Infusion bottle basket
a
Writing shelf
a
Monitor shelf
a
Utility shelf
a
Crutches holder
a a
Name holder
a a
Horizontal oxygen bottle holder
a
Vertical oxygen bottle holder
a
with Adaptor
a
Siderail accessory holder
a
Accessory rail
a
Ventilation circuit holder
a
Urine sack holder
a
Positioning cushion
a a a
To Next Page
Loading...
General
