D9U001GE4-0101_05
63
13 Bed Exit Monitoring (only version with scales)
Use iBoard Basic to control the Bed Exit Monitoring.
If the bed is equipped with SafetyMonitor (accessory), Bed Exit Monitoring function is included between the functions of the Safety-
Monitor.
iBoard Basic
13.1 Preparation
► Place a patient on the bed with suitable mattress.
► For the correct Bed Exit Monitoring in the Inner Zone patient´s position in the middle of the bed is needed.
13.2 Activation of Bed Exit Monitoring
Bed Exit Monitoring is OFF and icon is displayed by default.
To activate Bed Exit Monitoring:
► Press button .
Icon appears on the display.
When Bed Exit Monitoring is activated Inner Zone is set by default. Icon therefore appears on the display.
NOTE Minimum patient weight for Bed Exit Monitoring is 35 kg.
13.3 Monitored Zone
To switch to the Outer Zone:
► Press button .
Icon appears on the display.
To set the Inner Zone again:
► Press button .
Icon appears on the display.
1. ON Button
2. Inner Zone Button
3. Outer Zone Button
4. OFF Button
5. VOLUME Button (3 levels)
6. PAUSE Button
7. Volume Icon (3 levels)
8. Bed Exit Monitoring Activated
(Outer Zone)
9. ON (Bed Exit Monitoring is
activated)
6
5
2 3 41
8
9
7
Fig. Bed Exit Monitoring Section (iBoard Basic) - display and keyboard
To Next Page
Loading...
Need help?
General
