2.1 Safety instructions
Follow the instructions carefully.
Any non-observance of this manual may lead to injuries or material damage.
Exclusively use the bed if it is in perfect working order.
If necessary, check the bed functions daily or at each shift change.
Use the bed exclusively in its original condition.
Use the bed exclusively with the correct mains supply.
Ensure that the bed is exclusively operated by qualified personnel .
Ensure that the patient (health permitting) has been informed about the operation of the bed and all
applicable safety instructions.
Move the bed exclusively on even, hard-surfaced floors.
Replace any damaged parts immediately with original spare parts.
Ensure that maintenance and installation are performed exclusively by qualified personnel who have been
trained by the manufacturer.
Do not apply excess weight or loads to the bed according to SWL (safe working load).
During peak loads or unavoidable excess loads (CPR), place mattress platform in the lowest position.
Ensure that only one adult patient uses the bed at any time.
Take care to avoid injuries or squeezing when operating moving parts.
When using lifting poles or infusion stands, ensure that nothing will be damaged when you move or adjust
the bed.
Ensure that castors are braked when the bed not being moved, regardless of whether the bed is occupied
or empty
Keep the mattress platform in the lowest position at any time when the healthcare personnel are not
treating the patient in order to prevent the patient from falling or injuries.
Ensure that siderails are operated exclusively by healthcare personnel.
Never use the bed in areas where there is a hazard of explosion.
Enable or disable functions on the handset using the supervisor panel as appropriate for the patient’s
physical and mental state. Verify that the function is actually disabled.
Never handle the mains plug with wet hands.
Unplug the mains cable exclusively by pulling on the plug.
To Next Page
Loading...
Need help?
General
