LINET Image 3 B User Manual

45
D9U001AM2-0101_04
14.2.4 Safety checks
In accordance with the Medical Devices Operator Ordinance, the operator is required to perform a technical
safety check on the hospital bed every 12 months.
The procedure for performing the safety check is stipulated in EN 62353:2008.
NOTE: The manufacturer will give a certificate to service organisations in which the manufacturer declares that
the service organisation is qualified to perform maintenance on LINET
®
products. On request, the LINET
®
will
provide service documentation and circuit diagrams for qualified service technicians trained by LINET
®
.
WARNING!
Incorrect safety checks can cause injuries!

Ensure that safety checks are performed by qualified or authorised personnel certified by the
manufacturer.

Ensure that the safety checks are recorded in the service and maintenance log.
WARNING!
A defective bed can cause injuries!

A defective bed must be inspected and repaired immediately.

If the defect cannot be immediately repaired, do not continue to use the bed.

LINET Image 3 B Specifications

General

Brand	LINET
Model	Image 3 B
Category	Medical Equipment
Language	English