Linhai M565Li - DAILY PRE-RIDE INSPECTION

M565Li OWNER’S/OPERATOR’S MANUAL
4. DAILY PRE-RIDE INSPECTION
15
You must inspect your ATV each time before riding to ensure it is in proper
working order. If proper inspection is not done, severe injury or death could
result.
Use the following checklist to verify that your machine is in proper working
order every time you ride.
Item/Inspection
1.
Tire - check condition and pressures.
2.
Fuel tank - fill the fuel tank to the proper lever.
3.
All brakes - check operation, adjustment and fluid level (including auxiliary
brake).
4.
Throttle - check for free operation and closing.
5.
Headlight / Taillight / Brake light - check operation of all lights, indicator
lights and switches.
6.
Engine stop switch - check for proper function.
7.
Wheels - check for tightness of wheel nuts and axle nuts; check that axle
nuts are secured by cotter pins.
8.
Air cleaner element - check for dirt; clean or replace.
9.
Steering - check for free operation noting any unusual looseness in any
area.
10.
Loose parts - visually inspect ATV for any damaged components or loose
nuts/bolts or fasteners.
11.
Operator´s helmets, goggles and clothing.
12.
Engine coolant - check for proper level at the recovery bottle.
WARNING