M565Li OWNER’S/OPERATOR’S MANUAL
7. CONTROL AND PARTS FUNCTIONS
32
Ignition Switch
The ignition switch has three positions:
A. “OFF”
B. “ON”
C. “HEADLIGHT”
“OFF”: Turn the Ignition Switch Key to this position to stop the engine, switch
off all the electrical circuits and remove the key.
“ON”: In this position, the ATV electrical system is connected, the engine can
be started and the key cannot be removed.
“HEADLIGHT”: In this position, the headlights are on.
Never turn the key to “OFF” position when the ATV is in motion.
Otherwise the electrical system is shut off, which is likely to result in
losing control or having an accident. Always make sure that the ATV is
stopped before turning the key to “OFF” position.
WARNING
To Next Page
Loading...
