M565Li OWNER’S/OPERATOR’S MANUAL
12. RIDING
58
Crossing Water
Your ATV can only operate in water up to maximum depth 20 cm.
Before entering streams, always:
1.
Determine water depth and speed.
2.
Choose a crossing where both banks have gradual inclines.
3.
Keep speed slow, avoiding rocks and obstacles if possible.
4.
After crossing the water, briefly apply the brakes to make sure they work.
Never operate the ATV through deep or fast flowing water.
NOTE: After running in water, it is critical your machine is serviced as outlined
in the maintenance chart see “16. Maintenance”. Following areas need
special attention: engine oil, transmission oil, rear gear case, and all grease
fittings.
To Next Page
Loading...
