Linkam Scientific Instruments LinkPad T96 User Manual

© 2017 Linkam Scientific Instruments Ltd.
19
v1.1.0
The only additional information displayed for a DSC450 sta ge is the Dsc value in mW (1). There a re no additional controls. Plea se see your DSC450
sta ge ma nual for further informa tion.
Plea se note it is not possible to record data using the LinkPad. The DSC stages should ideally be controlled using the optiona l LINK software.
Expansion board setup
DSC600, DSCX600 and DSC450 s tages will ha ve a DSC sensor expa nsion board fitted to their T96 controller, which ha s the following s etup screen,
accessed by ta ping on the options ba r a nd taping on the blue arrow:
No cha nges can be ma de on this screen, it is for informa tion only.
Humidity control
This section applies if you have a Linkam RH95 humidity controller atta ched to your system.
Additional main screen display items:
When an RH95 is attached to the T96 controller, the LinkPad main screen will display the following additional items:

Linkam Scientific Instruments LinkPad T96 Specifications

General

Brand	Linkam Scientific Instruments
Model	LinkPad T96
Category	Controller
Language	English