26
Advanced | Dynamic DNS
Advanced > Dynamic DNS
Enable DDNS: Users can enable or disable the Dynamic DNS service by clicking the check box.
n Service Provider: Select either dyndns, noip or ChangeIp as the Dynamic DNS service
provider for the CPE.
n Username: Dynamic DNS service login credential.
n Password: Dynamic DNS service login credential.
n Domain Name: Enter the domain name that you want to create for your services.
Advanced | Port Forwarding
Advanced > Port Forwarding
Enabled: Users can enable or disable the Port Forwarding service by clicking the check box.
n Application Name: Create a name for the port forwarding service.
n Protocol: Select which protocol that requires to forward, TCP, UDP or Both.
n WAN Port: Setup a range of WAN port.
n LAN Port: Setup LAN port.
n LAN IP: Setup LAN IP address.
To Next Page
Loading...
