3.
Click Next when the New Scope Wizard Begins.
4.
Enter the name and description for the scope, click Next.
5.
Define the IP address range. Change the subnet mask if necessary. Click Next.
6.
Add exclusions in the address fields if required. If no exclusions are required, leave it
blank. Click Next.
7.
Change the Lease Duration time if preferred. Click Next.
8.
Select Yes, I want to configure these options now, and click Next.
9.
Enter the router address for the current subnet. The router address may be left blank if
there is no router. Click Next.
109
To Next Page
Loading...
